Special Ring Bore Gauge For Measuring Bores With Boring Bar Left In The Workpiece. Self-Centring Bore Gauge For Determining Bore Diameters, For Instance With Boring Bar Left In The Workpiece. Measuring Gauge With Column (Mm- Or Inch-Graduation) For Pre-Setting Of The Diameter,
3mm Tungesten Carbide Ball Point Anvils
Anvil Retracting Range: 2.25 mm
Repeatability Of Indicator: 0.002mm
Protective Wooden Case Included.
| Application Range (mm) | Min. Dia. Of Boring Bar (mm) | Max. Dia. Of Boring Bar (mm) |
|---|---|---|
| 25-75 mm | 12mm | 45mm |
| 35-100 mm | 17.5mm | 70 mm |
| 100-210mm | 50 mm | 130mm |
| 150-300mm | 100mm | 150mm |
Designed For Quick Go/ No Go Judgment of Diameters of Cylinders And Shafts In Machining Processes. Wide (13.5 X 13.0 Mm) and (10 x10 mm) Flat Carbide Anvils.
Anvil Retracting Range: 2.0 mm
Anvil Positioning Range: 25mm
Adjustment Nut Adjust The Measuring Range
Clamp Nut Lock Size Adjustments
Flatness of Measuring Face 0.001mm
Repeatability of Indicator: 0.002mm
Optional accessory: Dial indicators and digital indicators (reading 0.010mm, 0.001mm)
| Size | Parallelism | Size | Parallelism |
|---|---|---|---|
| 0-25mm | 0.004 mm | 150-175 mm | 0.009 mm |
| 25 -50mm | 0.004mm | 175-200mm | 0.010mm |
| 50-75mm | 0.005mm | 200-225mm | 0.011mm |
| 75-100mm | 0.006mm | 225-250mm | 0.012mm |
| 100-125mm | 0.007mm | 250-275mm | 0.013mm |
| 125-150mm | 0.008mm | 275-300mm | 0.014mm |
For Setting Tool Height On Machineing Centers
Large Measuring Surface And Shaft To Assure Hight Measuring Accuracy, Low Spring Force To Avoid Breakage Of Small End Mill And Drill, Easy To Be Calibrated By A Ground Parallel Or Gauge Block
Setting Height : 50.00 mm +/- 0.010 mm
Accuracy : +/- 0.010 mm
| Height | Accuracy | Test Force |
|---|---|---|
| 50 mm | +/- 0.010 mm | 10n (at 50 mm) |